Product Details
Place of Origin: baoji
Brand Name: TLHT
Payment & Shipping Terms
Minimum Order Quantity: 500
Payment Terms: T/T
Supply Ability: 10000
Pipe Specification: |
DN40-DN250 |
Design Temperature: |
-40~90 ℃ |
Design Pressure: |
≤ 32MPa |
Executive Technical Standard: |
Executive Technical Standard |
Pipe Specification: |
DN40-DN250 |
Design Temperature: |
-40~90 ℃ |
Design Pressure: |
≤ 32MPa |
Executive Technical Standard: |
Executive Technical Standard |
Polyester fiber reinforced adhesive flexible composite pipe (DN40-250)
Polyester fiber reinforced adhesive flexible composite pipes are designed to address the problems of severe corrosion, short service life, high maintenance costs, and low pressure resistance of traditional non-metallic pipes in gathering and transportation pipelines.
The bonded composite process improves the overall mechanical performance of the composite pipe, with a higher pressure resistance level and stronger resistance to external pressure deformation compared to traditional non bonded flexible composite pipes, and a larger manufacturing diameter; Better impact resistance, tensile resistance, and gas permeability resistance; The integral pipe wall structure can be welded by non-metallic sleeve electric heating fusion. This non-metallic reinforced joint connection technology completely solves the problem of traditional flexible pipe metal joints being prone to corrosion, enabling the service life of both the joint and the pipe body to reach over 20 years
Pipe specification: DN40-DN250
Design temperature: -40~90 ℃
Design pressure: ≤ 32MPa, DN40-50. High pressure rating 32MPa, DN65-80. High pressure rating 25MPa, DN90-125. High pressure rating 20MPa, DN150-250. High pressure rating 10MPa.
Executive technical standard: SY/T6662.2-2020
Under DN150, coil supply can be used, and the length of a single pipeline can reach 100-1200 meters.
Connection method: non-metallic electric fusion pipe fittings, metal joints. Design pressure PN ≤ 6.4MPa, using non-metallic reinforced electric fusion, flanges, and other metal joints for connection; Design pressure PN>6.4MPa, using metal compression joints, Huff sleeve connections, threaded connections, and integrated joint connections
