logo
Baoji Tianlian Huitong Composite Materials Co., Ltd.
Produk
Produk
Rumah > Produk > Pipa Termoplastik Bertulang > Wear-resistant Composite Pipe for Mining

Wear-resistant Composite Pipe for Mining

Rincian produk

Tempat asal: Cina

Nama merek: TLHT

Sertifikasi: API 15S

Syarat Pembayaran & Pengiriman

Kuantitas min Order: 1000M

Harga: Customized

Syarat-syarat pembayaran: T/T

Dapatkan Harga Terbaik
Menyoroti:
Tekanan nominal:
1.6MPa-32MPa
Spesifikasi dan model pipa tahan aus koil kontinyu:
DN50mm-DN250mm;
Lapisan tahan aus:
PoE
Tekanan nominal:
1.6MPa-32MPa
Spesifikasi dan model pipa tahan aus koil kontinyu:
DN50mm-DN250mm;
Lapisan tahan aus:
PoE
Wear-resistant Composite Pipe for Mining

Wear-resistant composite pipes have a multi-layer structure. From the inside out, they are mainly composed of a wear-resistant inner layer, a steel cord reinforcing layer, and an outer protective layer. The reinforcing layer of the pipe body forms an integral pipe wall structure that cannot move relatively with adjacent layers through fusion or bonding. A typical structure is shown in the figure.
When used for trenchless pipeline repair or in large-slope laying conditions, pre-impregnated tape materials can be wound at a certain Angle or axially accompanied on the surface of the reinforcing layer to increase the tensile strength of the wear-resistant composite pipe.
Continuous coil wear-resistant pipe specification and model :DN50mm-DN225mm;
Nominal pressure :1.6MPa-32MPa
Specification and model of fixed-length wear-resistant pipe :DN250mm-DN900mm;
Nominal pressure :1.6MPa-12MPa

Wear-resistant Composite Pipe for Mining 0