製品詳細
起源の場所: 中国
ブランド名: TLHT
証明: API 15S
支払及び船積みの言葉
最小注文数量: 1000M
価格: Customized
支払条件: T/T
公称圧力: |
1.6MPa～32MPa |
連続コイル耐摩耗管の仕様と型式: |
DN50mm-DN250mm; |
耐磨層: |
PoE |
公称圧力: |
1.6MPa～32MPa |
連続コイル耐摩耗管の仕様と型式: |
DN50mm-DN250mm; |
耐磨層: |
PoE |
Wear-resistant composite pipes have a multi-layer structure. From the inside out, they are mainly composed of a wear-resistant inner layer, a steel cord reinforcing layer, and an outer protective layer. The reinforcing layer of the pipe body forms an integral pipe wall structure that cannot move relatively with adjacent layers through fusion or bonding. A typical structure is shown in the figure.
When used for trenchless pipeline repair or in large-slope laying conditions, pre-impregnated tape materials can be wound at a certain Angle or axially accompanied on the surface of the reinforcing layer to increase the tensile strength of the wear-resistant composite pipe.
Continuous coil wear-resistant pipe specification and model :DN50mm-DN225mm;
Nominal pressure :1.6MPa-32MPa
Specification and model of fixed-length wear-resistant pipe :DN250mm-DN900mm;
Nominal pressure :1.6MPa-12MPa
ビデオ
ビデオ
ビデオ
ビデオ
ビデオ
ビデオ
ビデオ
ビデオ
ビデオ
ビデオ
ビデオ
